96" Portland DOT BUMP Stencil

96" Portland DOT BUMP Stencil SKU: 1800-5PDX10

This 96" Portland DOT BUMP Stencil can be used for large projects like highways or roads. The stroke for each of the letters is 3" wide. Each of the characters is 16" wide. The flexibility of the stencil material allows it to be stored just about anywhere and be cleaned very easily. These 96" is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD.

(Portland DOT Specifications (P-435)

Other Portland Stencils

• 72" Portland DOT Bike Rider Symbol - 5PDX01
• 10" Portland DOT Handicap with Arrow Stencil - 5PDX02
• 6" Portland DOT Bike Symbol with Arrow Stencil - 5PDX03
• 13" Portland DOT Pedestrian Symbol with Border Stencil - 5PDX04
• Portland DOT Arrow with Border Stencil - 5PDX05-5PDX05W
• 72" Portland DOT Speed Bump Symbol - 5PDX06
• 66" Portland DOT ONLY Stencil - 5PDX07
• 66" Portland DOT LRT Stencil - 5PDX08
• 66" Portland DOT BUS Stencil - 5PDX09
• 72" Portland DOT Bike Lane Symbol Stencil - 5PDX11
  
• 42" Portland DOT Bike Lane Chevron Stencil - 5PDX12

Specifications

Country of origin: USA

     Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

     116-5PDX10 108-5PDX10 080-5PDX10 025-5PDX10

Selecting a Stencil Grade:

·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.