Home » 96" Florida DOT TURN Stencil
1-800-Stencil

96" Florida DOT TURN Stencil

In stock
SKU: 108-5FL08
$500.00

96" Florida DOT TURN Stencil SKU: 1800-5FL08

The 96 inch Florida DOT "TURN" stencil is great for painting along large parking lots and roadways. This stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Florida DOT Specifications (711-001/ Sheet 1)

Specifications

Stencil Width 82"
Stencil Height 96"
Material Width 45" for each 2 pieces
Material Height 114"
Availability Usually Ships in 1-2 days or sooner*


Other Part Numbers

116-5FL08 108-5FL08 080-5FL08 025-5FL08

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.