Home » 180" Houston DOT 610 Interstate Shield Stencil
1-800-Stencil

180" Houston DOT 610 Interstate Shield Stencil

In stock
SKU: 108-5COH12
$914.00

180" Houston DOT State 610 Interstate Shield Stencil SKU: 1800-5COH12

The 180 inch Houston DOT 610 Interstate Interstate Shield Stencil follows the State Louisiana's Department of Transportation specification for yield lines in pavement roads. It is very easy to clean and reuse, so don't worry about having to buy a new one every painting job you have. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Houston DOT Specifications (PM (SHIELD-1) -04)

Other Houston Stencils

    Specifications

    Stencil Width 84"
    Stencil Height 180"
    Material Width Varies (see images)
    Material Height Varies (see images)
    State
    		 Houston
    Availability In Stock - Ships Same Day*


    Country of origin: USA

         Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

          Other Part Numbers

         116-5COH12 108-5COH12 080-5COH12 025-5COH12

     

     

    Selecting a Stencil Grade:

    ·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

    ·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

    ·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

    ·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.