Home » 164" Maine DOT Left Roundabout Arrow Stencil
1-800-Stencil

164" Maine DOT Left Roundabout Arrow Stencil

In stock
SKU: 108-5ME11
$488.00

164" Maine DOT Left Roundabout Arrow Stencil SKU: 5ME11

Pavement markings play a crucial role in directing, cautioning, and regulating traffic through the use of words, symbols, and arrows. These visible markings on the road surface are essential for guiding drivers, warning them of potential hazards, and ensuring proper traffic flow. That is why this 164" Maine DOT Left Roundabout Arrow Stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Maine DOT Specifications (627(02)D)

Other Maine Stencils


      Specifications

      Tail Stroke 8"
      Stencil Width

      52"
      Stencil Height 164"
      Material Width 66" total
      Material height 238" total
      Availability Usually Ships in 1-2 days or sooner*

       

       

       

       

       

       

       

       

       

       

      Country of origin: USA

      Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

      108-5ME11 116-5ME11 080-5ME11 025-5ME11

       

      Selecting a Stencil Grade:

      • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
      • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
      • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
      • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.