111" Sharrow (Legacy) SHARED BIKE LANE Stencil

111" Sharrow (Legacy) SHARED BIKE LANE Stencil SKU: 0356-111

"Sharrows" have become a major part of some cityscapes, built to the same quality standards as all of our stencils, this Shared Bike Lane or "Sharrow" stencil will perform perfect for you. Our in-house designer is very through and places bridging for complicated stencils like this one in strategic areas to make sure the stencil is as easy to use as possible, and not detriment the integrity of the logo. According to the US Manual on Uniform Traffic Control Devices, shared-lane markings are used to: Assist bicyclists with lateral positioning in a shared lane with on-street parallel parking in order to reduce the chance of a bicyclist's impacting the open door of a parked vehicle; Assist bicyclists with lateral positioning in lanes that are too narrow for a motor vehicle and a bicycle to travel side by side within the same traffic lane; Alert motorists of the lateral location bicyclists are likely to occupy within the traveled way; Encourage safe passing of bicyclists by motorists; and Reduce the incidence of wrong-way bicycling. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4356-111 5356-111 6356-111 7356-111

Selecting a Stencil Grade:

• 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.